Manly Hydraulics Laboratory - Sydney Offshore Wave Data Buoy (WAVESYD)
Updated: 2019-03-05
This is a metadata record for the Sydney offshore wave data buoy (station code WAVESYD) operated by Manly Hydraulics Laboratory (MHL), NSW Office of Environment and Heritage (OEH). The buoy is moored off Sydney at a water depth of approximately 85m. This metadata record includes a down-loadable .pdf summary document which includes a map with numbered deployment locations and a listing of deployment number, location, water depth and deployment period. The Sydney buoy is a direction capable wave-rider buoy made by the Dutch company Datawell. The Directional Waverider buoy utilises a heave-pitch-roll sensor, two fixed X and Y accelerometers and a three axis fluxgate compass to measure both vertical and horizontal motion. An on-board processor converts the buoy motion to three orthogonal (vertical, north-south, east-west) translation signals that are transmitted to the shore station. The directional spectrum is also routinely transmitted to the receiving station for further processing. This buoy also collects sea surface temperature (SST) data from thermistors that are mounted inside the hull of the buoys, at the base of the buoy about 0.5m below the water surface. The wave and SST data are stored on the receiving station PC before routine transfer to Manly Hydraulics Laboratory via email.
Data
- Link to download netCDF data file - wave data
- Link to download netCDF data file - SST data
- Sydney buoy deployment summary
- Full metadata link
- {"title":"Manly Hydraulics Laboratory Waverider buoys","recordAbstract":"Manly Hydraulics Laboratory (MHL) part of the NSW Office of Environment and Heritage (OEH) (function now assumed by NSW Department of Planning, Industry and Environment (DPIE)) operates a system of Waverider buoys off the NSW coastline. The buoys measure wave height and other wave statistics such as wave period on a continuous real-time basis. Some of the buoys are also capable of measuring wave direction and sea surface temperature (discoverable in a separate collection: Manly Hydraulics Laboratory Waverider buoys - Sea surface temperature data - https://catalogue-imos.aodn.org.au:443/geonetwork/srv/api/records/81c5f192-d4af-4dfe-a660-af15ae46a22a). This metadata record is a parent record describing the MHL Waverider system as a whole. The child metadata records describe each deployment of the buoy in more detail with links to downloadable data. The data is gathered by the Waverider system developed by the Dutch company, Datawell. The Waverider system uses an accelerometer mounted in a loose tethered buoy (0.7 or 0.9m in diameter) to measure the vertical accelerations of the buoy as it moves with the water surface. The accelerations are integrated twice within the buoy and the displacement signal so obtained is then transmitted to a shore station where it is processed to provide wave data statistics. The wave data is stored on the receiving station PC before routine transfer to Manly Hydraulics Laboratory via email. The wave direction capable Waverider buoys utilise a heave-pitch-roll sensor, two fixed X and Y accelerometers and a three axis fluxgate compass to measure both vertical and horizontal motion. An on-board processor converts the buoy motion to three orthogonal (vertical, north-south, east-west) translation signals that are transmitted to the shore station. \nThe data originally represented by this metadata record has been reformatted and now forms part of the National Wave Archive, and is accessible from that collection - https://catalogue-imos.aodn.org.au:443/geonetwork/srv/api/records/2807f3aa-4db0-4924-b64b-354ae8c10b58. The original data has been archived (contact IMOS for access)."}
- {"title":"Manly Hydraulics Laboratory - Byron Bay Offshore Wave Data Buoy (WAVEBYB)","recordAbstract":"This is a metadata record for the Byron Bay offshore wave data buoy (station code WAVEBYB) operated by Manly Hydraulics Laboratory (MHL), NSW Office of Environment and Heritage (OEH). The buoy is moored off Byron Bay at a water depth of approximately 65m.\n\nThis metadata record includes a down-loadable .pdf summary document which includes a map with numbered deployment locations and a listing of deployment number, location, water depth and deployment period.\n\nData from October 1976 to October 1999 was gathered by the Waverider system developed by the Dutch company, Datawell. The Waverider system uses an accelerometer mounted in a loose tethered buoy (0.7 or 0.9m in diameter) to measure the vertical accelerations of the buoy as it moves with the water surface. The accelerations are integrated twice within the buoy and the displacement signal so obtained is then transmitted to a shore station where it is processed to provide wave data statistics.\n\nIn October 1999 the station was upgraded with a Datawell Directional Waverider buoy. The Directional Waverider buoy utilises a heave-pitch-roll sensor, two fixed X and Y accelerometers and a three axis fluxgate compass to measure both vertical and horizontal motion. An on-board processor converts the buoy motion to three orthogonal (vertical, north-south, east-west) translation signals that are transmitted to the shore station. The directional spectrum is also routinely transmitted to the receiving station for further processing. This buoy also collects sea surface temperature (SST) data from thermistors that are mounted inside the hull of the buoys, at the base of the buoy about 0.5m below the water surface. The wave and SST data are stored on the receiving station PC before routine transfer to Manly Hydraulics Laboratory via email."}
- {"title":"Manly Hydraulics Laboratory - Eden Offshore Wave Data Buoy (WAVEEDN)","recordAbstract":"This is a metadata record for the Eden offshore wave data buoy (station code WAVEEDN) operated by Manly Hydraulics Laboratory (MHL), NSW Office of Environment and Heritage (OEH). The buoy is moored off Eden at a water depth of approximately 100m.\n\nThis metadata record includes a down-loadable .pdf summary document which includes a map with numbered deployment locations and a listing of deployment number, location, water depth and deployment period.\n\nData from February 1978 to December 2011 was gathered by the Waverider system developed by the Dutch company, Datawell. The Waverider system uses an accelerometer mounted in a loose tethered buoy (0.7 or 0.9m in diameter) to measure the vertical accelerations of the buoy as it moves with the water surface. The accelerations are integrated twice within the buoy and the displacement signal so obtained is then transmitted to a shore station where it is processed to provide wave data statistics. \n\nIn December 2011, the station was upgraded with a Datawell Directional Waverider buoy. The Directional Waverider buoy utilises a heave-pitch-roll sensor, two fixed X and Y accelerometers and a three axis fluxgate compass to measure both vertical and horizontal motion. An on-board processor converts the buoy motion to three orthogonal (vertical, north-south, east-west) translation signals that are transmitted to the shore station. The directional spectrum is also routinely transmitted to the receiving station for further processing. This buoy also collects sea surface temperature (SST) data from thermistors that are mounted inside the hull of the buoys, at the base of the buoy about 0.5m below the water surface. The wave and SST data are stored on the receiving station PC before routine transfer to Manly Hydraulics Laboratory via email."}
- {"title":"Manly Hydraulics Laboratory - Coffs Harbour Offshore Wave Data Buoy (WAVECOH)","recordAbstract":"This is a metadata record for the Coffs Harbour offshore wave data buoy (station code WAVECOH) operated by Manly Hydraulics Laboratory (MHL), NSW Office of Environment and Heritage (OEH). The buoy is moored off Coffs Harbour at a water depth of approximately 70m.\n\nThis metadata record includes a down-loadable .pdf summary document which includes a map with numbered deployment locations and a listing of deployment number, location, water depth and deployment period.\n\nData from May 1976 to February 2012 was gathered by the Waverider system developed by the Dutch company, Datawell. The Waverider system uses an accelerometer mounted in a loose tethered buoy (0.7 or 0.9m in diameter) to measure the vertical accelerations of the buoy as it moves with the water surface. The accelerations are integrated twice within the buoy and the displacement signal so obtained is then transmitted to a shore station where it is processed to provide wave data statistics. \n\nIn February 2012, the station was upgraded with a Datawell Directional Waverider buoy. The Directional Waverider buoy utilises a heave-pitch-roll sensor, two fixed X and Y accelerometers and a three axis fluxgate compass to measure both vertical and horizontal motion. An on-board processor converts the buoy motion to three orthogonal (vertical, north-south, east-west) translation signals that are transmitted to the shore station. The directional spectrum is also routinely transmitted to the receiving station for further processing. This buoy also collects sea surface temperature (SST) data from thermistors that are mounted inside the hull of the buoys, at the base of the buoy about 0.5m below the water surface. The wave and SST data are stored on the receiving station PC before routine transfer to Manly Hydraulics Laboratory via email."}
- {"title":"Manly Hydraulics Laboratory - Crowdy Head Offshore Wave Data Buoy (WAVECRH)","recordAbstract":"This is a metadata record for the Crowdy Head offshore wave data buoy (station code WAVECRH) operated by Manly Hydraulics Laboratory (MHL), NSW Office of Environment and Heritage (OEH). The buoy is moored off Crowdy Head at a water depth of approximately 80m.\n\nThis metadata record includes a down-loadable .pdf summary document which includes a map with numbered deployment locations and a listing of deployment number, location, water depth and deployment period.\n\nData from October 1985 to August 2011 was gathered by the Waverider system developed by the Dutch company, Datawell. The Waverider system uses an accelerometer mounted in a loose tethered buoy (0.7 or 0.9m in diameter) to measure the vertical accelerations of the buoy as it moves with the water surface. The accelerations are integrated twice within the buoy and the displacement signal so obtained is then transmitted to a shore station where it is processed to provide wave data statistics. \n\nIn August 2011, the station was upgraded with a Datawell Directional Waverider buoy. The Directional Waverider buoy utilises a heave-pitch-roll sensor, two fixed X and Y accelerometers and a three axis fluxgate compass to measure both vertical and horizontal motion. An on-board processor converts the buoy motion to three orthogonal (vertical, north-south, east-west) translation signals that are transmitted to the shore station. The directional spectrum is also routinely transmitted to the receiving station for further processing. This buoy also collects sea surface temperature (SST) data from thermistors that are mounted inside the hull of the buoys, at the base of the buoy about 0.5m below the water surface. The wave and SST data are stored on the receiving station PC before routine transfer to Manly Hydraulics Laboratory via email."}